- After spreading the adhesive onto the substrate, insert the base of the clip underneath the tile edge, along the 4 sides. On large tiles you may need to use more than one clip per side.
- Ensure the tile is set firmly into the adhesive bed. Then insert the levelling wedge into the clip and use the Mustang Tile Levelling Tool push the wedge through the clip until the tiles are level.
- Once the adhesive has set, the clip can simply be removed by tapping the clip and wedge parallel to the grout joint with a rubber mallet. Or by gently kicking them.
- The wedges can then be swept up and stored for the next use.